I 7057 DBL

TREND ACTIVE A class
Configure Technical Data
TREND ACTIVE A class / I 7057 DBL
Configure Technical Data
trend-i_6817_2024_l-sitzgruppe

I 6817 EB

 trend-i_6877_2024_l-sitzgruppe

I 6877

 trend_i_7057_eb_2024_l-sitzgru

I 7057 EB

 trend-i-7057-dbl.png

I 7057 DBL

trend-i-7057-ebl.png

I 7057 EBL

 trend-i-7027_v2.svg

I 7027
Configure a vehicle
Make an appointment
Find a dealer
View technical information
TREND ACTIVE A class I 7057 DBL
Price (incl. VAT) £97,890.00 a)
Standard chassis Fiat Ducato Light Low Platform
Standard engine 140 MultiJet 3
kW (bhp) 103 (140)
Emission standards Euro 6e-bis
Overall length, approx. 740
Overall width, approx. 233
Overall height, approx. 300 1
Headroom in living area, approx. 205
Towable load braked/unbraked 2000 / 750
Wheelbase, approx. 4035
Bed dimension: Front bed, L x W, approx. 196 x 150
Bed dimension: Rear bed, L x W, approx. 195 x 150
Sleeping berths standard / max. 4
Mass in running order (+/-5%)* 3052 (2899 to 3205)*
Manufacturer-specified mass for optional equipment* 100
Technically permissible maximum laden mass* 3499
Permitted number of seats (including driver)* 4
Refrigerator volume (thereof freezer), approx. 137 (15) / 137 (15) (○)
Waste water tank, approx. 90
Fresh water tank capacity, total/ Fresh water tank capacity at driving filling 116 / 20
Measurement storage opening right (W x H) 90 x 110
Measurement storage opening left (W x H) 90 x 110
1 Please note that the total height may increase due to additional roof structures and optional equipment..

a) This is a recommended retail price based on German retail prices. Prices in other countries may differ due to currency conversion and country-specific VAT, fees and import duties. Please contact a local dealer for the latest prices in your country.

* The specified mass in running order is a default value defined in the type-approval procedure. Due to manufacturing tolerances, the actual weighed mass in running order may deviate from the value stated above. Deviations of up to ± 5 % of the mass in running order are legally permissible and possible. The permissible range in kilograms is given in brackets after the mass in running order. The manufacturer-specified mass for optional equipment is a calculated value for each type and layout that Hymer uses to determine the maximum weight available for factory-fitted optional equipment. The limitation of optional equipment is intended to ensure that the minimum pay-mass, i.e. the legally prescribed free mass for baggage and retrofitted accessories, is actually available for the vehicle delivered by Hymer. The real weight of your vehicle ex works can only be determined when it is weighed at the end of the line. If, in exceptional cases, the weighing shows that the actual load capacity falls below the minimum pay-mass despite limiting the optional equipment due to a permissible weight deviation, we will check together with your trade partner and you whether we should, for example, increase the load capacity of the vehicle, reduce the number of seats or remove optional equipment before delivering the vehicle. The technically permissible maximum laden mass of the vehicle and the technically permissible maximum mass on the axle must not be exceeded.

(○) Optional
Length
740 cm
Width
233 cm
Height
300 cm
Sleeping berths max.
4
Technically permissible maximum laden mass
3499 kg
Price
£97,890.00
A Class

Layout
I 7057 DBL Active

Two spacious wardrobes to the right and left of the bed
Cosy lounge seating area with two folding seats in the direction of travel with 3-point seat belts
Height-adjustable double bed
Floor-to-ceiling wooden sliding door to separate the bedroom
Spacious bathroom with separate concrete-look shower and toilet room with door that closes to the living area
Two spacious wardrobes to the right and left of the bed
360°
360° view

The 360-degree images are designed to provide you with an impression of the space. Please be aware that upholstery and wood decors are sometimes displayed inaccurately for technical reasons.

Exterior View

Lifetime Smart superstructure - with wood-free, GRP-clad underbody
70 cm wide habitation door with convenient coupe entrance
Large rear garage can be loaded on both sides, one-hand operation of the garage doors, lighting, 230 V socket and sturdy lashing rails
Exclusive rear design with top-entry rear wall, ShapeLine LED tail lights and 3rd brake light integrated into the rear spoiler
Lifetime Smart superstructure - with wood-free, GRP-clad underbody

Living in the Trend Active

  • Living in the king of the road

    A-Class motorhomes are considered the “royalty” of the motorhoming world – and for good reason. Thanks to the integrated cab with its vast front windshield in the living room and the large panoramic skylight above the seating lounge, the whole interior feels incredibly expansive and bright.

    The cab in the TREND ACTIVE A Class includes a pull-down bed as standard. Even when lowered, the pull-down bed still allows you to sit comfortably at the table.
    If preferred, the pull-down bed can be replaced with a furniture module for the cab.

    (I 7057 EBL)

  • Cab furniture module instead of pull-down bed

    If you would rather have more headroom and extra storage space in the cab, an optional furniture module is available instead of the pull-down bed.

  •

    Sturdy access handle

    A frequent customer request – now implemented in the TREND ACTIVE: the new entrance module includes a robust, integrated access handle along with practical storage compartments, ideal for items you might want to reach quickly from outside. The module is even attractively backlit to help you find your way in the dark.
    The space above it is designed for the optional TV, which is mounted vertically here.

  •

    The queen bed

    What if you need to get up during the night without waking your partner? That’s no problem in the spacious queen bed – you can simply slide out to one side! This layout also benefits from large wardrobes to the left and right at the head of the bed.

    The bed itself offers a generously sized sleeping area measuring 198 x 150 cm and is height-adjustable! Depending on how the rear garage is loaded, you can raise or lower the bed accordingly. (T/I 7057 DBL)

  •

    The pull-down bed in the A-Class model

    Unlike in the low-profile model, the pull-down bed in the A Class is positioned above the cab. This offers a major advantage: the seating lounge remains fully usable even when the pull-down bed is lowered.
    The pull-down bed offers a large sleeping area measuring 196 x 150 cm. It is also equipped with a high-quality cold foam mattress supported by a wooden slatted bed frame.

    The I 7027 is fitted with a special pull-down bed featuring lengthwise single beds.

  •

    Spacious bathroom

    A clever solution: the centre bathroom (depending on the model). The bathroom door can be used to close off the passageway to the living room. This creates a large bathroom and dressing room that offers total privacy. A wooden sliding door allows the bathroom to be separated from the bedroom.

  •

    Freshen up for the day ahead

    The mirror cabinet with sliding door offers plenty of storage space. Raised edges and elasticated straps prevent items from falling out. A window is fitted in every centre bathroom, improving air exchange – especially after showering.

  •

    Separate shower cubicle

    The spacious shower is fully waterproofed and finished to a high standard, with a sleek design that adds a touch of elegance. In the evening, the backlit shower equipment creates a beautifully atmospheric glow.

  •

    The perfect camper’s kitchen

    It comes fully equipped with a hot water system, a two-burner gas hob and plenty of storage space.

    For additional safety, the gas shut-off valves are conveniently located behind the drawer panel – so you can easily ensure that appliances like the hob, fridge and heater are disconnected from the gas supply after use.

Interior specification

1
  • The IsoProtect living area floor is completely free from steps or ledges – from the driver’s cab to the bathroom.
  • The floor compartment is another practical and versatile storage option. With its built-in drain, it’s ideal for muddy or wet items like (hiking) boots.
    It’s also a popular spot for tools, drinks or tins – and the low centre of gravity makes it the perfect place to store heavy items.
  • In some low-profile layouts, the seating lounge can be converted into an additional bed if required (depending on the model).

    Illustration shows the wrong upholstery
  • The overhead lockers are extremely roomy. They also feature AirPlus rear ventilation that prevents a build-up of condensation when the temperature drops.
  • On request, the Isofix system can be installed for safe attachment of child seats. Not available on models with transverse seating.

    Illustration shows the wrong upholstery
  • The heating is installed directly in the seating lounge, allowing the use of shorter pipes for perfect heating performance. The frost monitor valve is easily accessible via the kitchen cabinet.

    Illustration shows the wrong upholstery
  • Purpose-built for a relaxing driving experience: leather steering wheel with control buttons, driver and passenger airbags, air-conditioning, cruise control, the latest assistance systems and much more.

    The moniceiver (with DAB+), which also comes as standard, displays the image from the reversing camera.
  • The blinds on the front and side windows provide both blackout and insulation – keeping out heat and cold in equal measure.

Exterior specification

1
  • The large rear garages feature a service flap on both the left and right side, complete with practical one-hand operation. Lighting, a 230 V socket and a total of three lashing rails are fitted as standard.
  • The 6877 features an impressively tall and wide rear garage.
    It also comes with service flaps on both sides, each offering convenient one-hand operation. Lighting, a 230 V socket and a total of three lashing rails are fitted as standard. The warm air outlet helps prevent frost damage in winter.
  • The 70 cm-wide comfort habitation door, coupe entrance and electric step make getting in and out of the vehicle a breeze.
  • Automotive rear with ShapeLine LED rear lights. The side corners of the rear light moulding can be individually replaced and are therefore inexpensive to repair.
  • The aerodynamic skylight set into the cab hood on the low-profile models allows both light and air into the vehicle.
  • The roof, walls and underfloor are GRP-clad and thus optimally protected against damage.

Interior Design

  • Upholstery
Heron (partial leather)
  • Wood décor
Ashton

Dimensions

1
2
3
4
5

I 7057 DBL

1 Length 740 cm
2 Height 300 cm
3 Width 233 cm
4 Headroom 205 cm
5 Wheelbase 4035 mm

140 MultiJet 3

Fuel Diesel

6-gear

CCM
2184
Power
140 hp

Weight

Technically permissible maximum laden mass
3499 kg
Mass in running order
3052 kg
Manufacturer-specified mass for optional equipment
100 kg
Towable load braked
2000 kg
Towable load unbraked
750 kg
Electrical installation
Standard equipment
Awning light 12 V
Number of sockets 1x 12V, 7x 230V, 4x USB
LED lighting throughout the vehicle
Pre-wiring for solar
EBL with separate FI protection switch
Light Moments: Indirect ambient lighting above the overhead lockers
Light Moments: Indirect wall surface ambient lighting
Light Moments: illuminated kitchen splashback
Light Moments: Entrance segment with indirect lighting
Light Moments: Indirect lighting in the bathroom with illuminated shower panel
Leisure battery AGM, 95 Ah
Spotlights in the roof lining above the habitation door
Functional lighting (surface-mounted and recessed spotlights)
Automatic switch-on/disconnect for starter battery, leisure battery and refrigerator
On-board control panel
Optional equipment
Solar power system 110 watt
Lithium (LiFePo4) battery 2x150Ah (300Ah) incl. 45 A charge booster, instead of standard AGM battery
Lithium (LiFePo4) battery 150 Ah incl. 45 A charge booster, instead of standard AGM battery
Heating
Standard equipment
Heating in the seating unit for optimum heat distribution, built-in
Gas hot air heating 6kW with 1.8kW electric heating element and hot water boiler incl. digital control panel
Optional equipment
Hot-water floor heating
Floor heating electric (partial)
Hot-water heating with boiler, automatic drain valve and shut-off valve for the sleeping area and digital control panel
Hot-water carpet for the driver's cab
Heat exchanger for hot-water heating
Water supply
Standard equipment
Fresh water tank in insulated and heated area
Insulated waste water tank
Submersible pump
Optional equipment
Switch for water pump
Outdoor shower (cold water)
Gas supply
Standard equipment
Storage space for 2 gas bottles with a filling weight of 11 kg each, with simplified access
Optional equipment
Outdoor gas socket gas pressure 30 mbar
Automatic gas cylinder switchover incl. crash sensor and EisEx
Show more

Downloads

More vehicles from the Trend Active series

0 Results
Filter
  • Body type
  • Sleeping berths
  • Bed types
  • Length
  • Number of seats
TREND ACTIVE Low profile

T 6817 EB

Technically permissibile maximum laden mass*
3499 kg
Sleeping berths max.
5
Height
300
Length
699
Pricea)
£83,090.00
TREND ACTIVE Low profile

T 6877

Technically permissibile maximum laden mass*
3499 kg
Sleeping berths max.
5
Height
300
Length
699
Pricea)
£83,090.00
TREND ACTIVE Low profile

T 7057 EB

Technically permissibile maximum laden mass*
3499 kg
Sleeping berths max.
5
Height
300
Length
741
Pricea)
£85,090.00
TREND ACTIVE Low profile

T 7057 DBL

Technically permissibile maximum laden mass*
3499 kg
Sleeping berths max.
5
Height
300
Length
741
Pricea)
£87,190.00
TREND ACTIVE Low profile

T 7057 EBL

Technically permissibile maximum laden mass*
3499 kg
Sleeping berths max.
5
Height
300
Length
741
Pricea)
£87,190.00
TREND ACTIVE A class

I 6817 EB

Technically permissibile maximum laden mass*
3499 kg
Sleeping berths max.
4
Height
300
Length
699
Pricea)
£93,290.00
TREND ACTIVE A class

I 6877

Technically permissibile maximum laden mass*
3499 kg
Sleeping berths max.
5
Height
300
Length
699
Pricea)
£93,290.00
TREND ACTIVE A class

I 7057 EB

Technically permissibile maximum laden mass*
3499 kg
Sleeping berths max.
5
Height
300
Length
740
Pricea)
£95,890.00
TREND ACTIVE A class

I 7057 EBL

Technically permissibile maximum laden mass*
3499 kg
Sleeping berths max.
4
Height
300
Length
740
Pricea)
£97,890.00
TREND ACTIVE A class

I 7027

Technically permissibile maximum laden mass*
3499 kg
Sleeping berths max.
4
Height
300
Length
740
Pricea)
£96,990.00

Important information regarding the selection of your motorhome

IMPORTANT INFORMATION REGARDING THE SELECTION OF YOUR MOTORHOME

When buying a motorhome, camper van or urban vehicle (hereafter: motorhome), it is particularly important to choose the right layout and an appealing design. In addition, weight also plays an essential role. Family, friends, optional equipment, accessories and baggage – space must be available for all of these. At the same time, there are legal and technical limits to the configuration and load. Every motorhome is designed for a certain weight, which may not be exceeded during driving. For motorhome buyers, this raises the question: How should I configure my vehicle to accommodate passengers, baggage and accessories according to my needs without the vehicle exceeding this maximum weight? In order to make this decision easier for you, we provide you below with a few tips that are particularly important when selecting your vehicle from our portfolio:

1. The technically permissible maximum laden mass…

… is a value set by the manufacturer which the vehicle may not exceed. Dethleffs specifies a layout-related upper limit for the vehicle, which can vary from layout to layout (e.g. 3,500 kg, 4,400 kg). You can find the corresponding specification for each layout in the technical data.

 

2. The mass in running order…

... consists – to put it simply – of the basic vehicle with standard equipment plus a standard weight of 75 kg for the driver. It is legally permissible and possible for the mass in running order of your vehicle to deviate from the nominal value stated in the sales documents. The permissible tolerance is ± 5 %. The permissible range in kilograms is given in brackets after the mass in running order. In order to provide you with full transparency regarding possible weight deviations, Dethleffs weighs each vehicle at the end of the line and informs your trade partner of your vehicle's weighing result for forwarding to you.

Detailed explanations on the subject of mass in running order can be found in the “Legal Information” section.


3. The permitted number of seats (including driver)…

… is determined by the manufacturer in what is referred to as the type-approval procedure. This results in what is referred to as the mass of the passengers. For this, a standard weight of 75 kg per passenger (without driver) is calculated. 

Detailed explanations on the subject of mass of the passengers can be found in the “Legal Information” section.


4. The manufacturer-specified mass for optional equipment…

… is a value set by Dethleffs per layout for the maximum mass of optional equipment that can be ordered. This limit is intended to ensure that the minimum pay-mass, i.e. the legally prescribed free mass for baggage and retrofitted accessories, is actually available for the vehicle load capacity of the vehicles delivered by Dethleffs. If, in exceptional cases, the weighing at the end of the line nevertheless shows that the actual load capacity falls short of the minimum pay-mass due to a permissible weight deviation, we will check together with your trade partner and you whether we should, for example, increase the load capacity of the vehicle, reduce the number of seats or remove optional equipment before delivering the vehicle. 

Detailed explanations on the subject of the effects of the tolerances on the minimum pay-mass and the payload can be found in the “Legal Information” section.

 

5. The additional weight of optional equipment and packages...

... increases the actual mass of the vehicle (= mass in running order plus selected optional equipment) and reduces the pay-mass. The specified value shows the additional weight compared to the standard equipment of the respective layout. The total weight of the selected packages and optional equipment must not exceed the manufacturer-specified mass for optional equipment.

 

Accept and continue
Dethleffs dealer search
Find your nearest Dethleffs dealer
 
Your dealer information is loading...
Dealer search
 
Close
 
0 Dealer found
More filters
back
0 Dealer found
back
Your dealer information is loading...

Reachability

Weights and payload

DSGVO

Social Media

© Dethleffs 2026