Despite its compact exterior width of just 220 cm, the Just Van offers plenty of space and room to move around. The Light Moments lighting system (option) lets you create just the right atmosphere in the living room each evening.
With the optional JUPITER upholstery, the interior feels especially harmonious.
A highlight of the T5 is its spacious seating lounge, which includes a fixed single-pedestal table and gives the interior space a pleasantly open feel.
And when you stop for a break, there’s no need to swivel the driver’s or passenger seat to sit comfortably opposite your partner.
(T5 | JUPITER)
The opening panoramic window in the cab hood comes as standard, bringing natural light and fresh air into the spacious seating lounge.
The tabletop folds away to provide easy access to the cab.
(T5 | JUPITER)
The Just Van comes as standard with four registered seats.
The third seat is located in the left-hand bench seat and simply folds out. It’s forward-facing and fitted with a 3-point belt.
(T5)
The right-hand storage bench converts into a fourth seat, which faces rearwards and is also equipped with a seat belt.
(T5)
The 11 cm-thick 7-zone cold-foam mattresses, made from climate-regulating material and supported by ergonomic wooden slatted bed frames, ensure a healthy, restful night’s sleep.
The Just Van T4 and T5 models feature comfortable single beds. In the T5, the beds measure 205 x 80 and 202 x 75 cm; in the T4, they measure 200 x 80 and 192 x 75 cm.
In both models, simply insert the mattress infill to create a huge sleeping area spanning the full width of the vehicle.
(T5)
Simply pull out the drawer-like centre section, insert the additional upholstery – and you’re done! Two single beds quickly become one huge double bed.
In this configuration, access is via an attachable ladder.
(T5)
The compact kitchen in the Just Van has everything you need: a two-burner gas cooker, a hot water system and plenty of storage space.
The kitchen rear panel is both stylish and easy to clean. With the optional Light Moments lighting system, it’s also backlit, creating a warm, cosy atmosphere after sundown.
The side-mounted Multiflex rail can be customised to suit your needs. Add hooks for towels and oven gloves, or choose additional accessories from the original range, such as a paper roll holder or spice rack.
(T5 | JUPITER)
This photo clearly shows just how much storage space is provided.
The side-mounted flip-up worktop extension is ideal for setting things down or using a chopping board.
(T5 | JUPITER)
All Just Van models feature a swivel bathroom. In its standard position, it provides a conventional bathroom with a sink, toilet and plenty of storage space.
When you want to freshen up after a long journey, simply swing the rear wall round …
(T5)
The swivel bathroom’s rear wall can be easily swung over the toilet, creating a separate, fully plastic-lined shower cubicle with its own shower fittings.
Talk about efficient use of space!
(T5)
Fuel Diesel
6-gear
When buying a motorhome, camper van or urban vehicle (hereafter: motorhome), it is particularly important to choose the right layout and an appealing design. In addition, weight also plays an essential role. Family, friends, optional equipment, accessories and baggage – space must be available for all of these. At the same time, there are legal and technical limits to the configuration and load. Every motorhome is designed for a certain weight, which may not be exceeded during driving. For motorhome buyers, this raises the question: How should I configure my vehicle to accommodate passengers, baggage and accessories according to my needs without the vehicle exceeding this maximum weight? In order to make this decision easier for you, we provide you below with a few tips that are particularly important when selecting your vehicle from our portfolio:
1. The technically permissible maximum laden mass…
… is a value set by the manufacturer which the vehicle may not exceed. Dethleffs specifies a layout-related upper limit for the vehicle, which can vary from layout to layout (e.g. 3,500 kg, 4,400 kg). You can find the corresponding specification for each layout in the technical data.
2. The mass in running order…
... consists – to put it simply – of the basic vehicle with standard equipment plus a standard weight of 75 kg for the driver. It is legally permissible and possible for the mass in running order of your vehicle to deviate from the nominal value stated in the sales documents. The permissible tolerance is ± 5 %. The permissible range in kilograms is given in brackets after the mass in running order. In order to provide you with full transparency regarding possible weight deviations, Dethleffs weighs each vehicle at the end of the line and informs your trade partner of your vehicle's weighing result for forwarding to you.
Detailed explanations on the subject of mass in running order can be found in the “Legal Information” section.
3. The permitted number of seats (including driver)…
… is determined by the manufacturer in what is referred to as the type-approval procedure. This results in what is referred to as the mass of the passengers. For this, a standard weight of 75 kg per passenger (without driver) is calculated.
Detailed explanations on the subject of mass of the passengers can be found in the “Legal Information” section.
4. The manufacturer-specified mass for optional equipment…
… is a value set by Dethleffs per layout for the maximum mass of optional equipment that can be ordered. This limit is intended to ensure that the minimum pay-mass, i.e. the legally prescribed free mass for baggage and retrofitted accessories, is actually available for the vehicle load capacity of the vehicles delivered by Dethleffs. If, in exceptional cases, the weighing at the end of the line nevertheless shows that the actual load capacity falls short of the minimum pay-mass due to a permissible weight deviation, we will check together with your trade partner and you whether we should, for example, increase the load capacity of the vehicle, reduce the number of seats or remove optional equipment before delivering the vehicle.
Detailed explanations on the subject of the effects of the tolerances on the minimum pay-mass and the payload can be found in the “Legal Information” section.
5. The additional weight of optional equipment and packages...
... increases the actual mass of the vehicle (= mass in running order plus selected optional equipment) and reduces the pay-mass. The specified value shows the additional weight compared to the standard equipment of the respective layout. The total weight of the selected packages and optional equipment must not exceed the manufacturer-specified mass for optional equipment.
