A 7872-2 Family

XL Family A
XL Family A / A 7872-2 Family
Length
856 cm
Width
232 cm
Height
327 cm
Sleeping berths max.
6
Price
£119,090.00
Coachbuilt

Layout A 7872-2

Double dinette can be converted into a round seating group incl. fold-out seat bench extensions
Fold-up alcove underfloor
Storage space in longitudinal bench seat accessible from outside and inside
Double load-through floor under the seating area across the entire width of the vehicle
Several storage and service compartments in the double floor
Passageway from the living area to the rear garage
Spacious bathroom with integrated wardrobe
Double dinette can be converted into a round seating group incl. fold-out seat bench extensions

Exterior View

180 hp (132 kW) MultiJet engine, 8-speed automatic transmission, cruise control, air conditioning and much more.
70 cm wide comfort habitation door with window and electric step.
AirPlus rear ventilation and Lifetime modular construction (aluminium side panels, XPS insulation)
Huge, heated rear garage with 250 kg surface load, loadable on both sides, anti-slip floor covering, lashing rails, lighting, 230 V socket
Double-glazed flush-fitting windows
Absolute winterproof: double floor with frost-proof water installation
180 hp (132 kW) MultiJet engine, 8-speed automatic transmission, cruise control, air conditioning and much more.

Living in the XL A

  • LIVING – Simply spacious.

    A television (option) can be installed ergonomically at eye level. The required power and antenna connections are already present in the vehicle.
    The roomy, airy interior offers 209 cm of headroom.
    At 960 x 650 mm, the single-leg table is extremely spacious. It is height-adjustable and can be moved lengthways and crossways.
    The 70 cm-wide entrance door provides ample space for easy passage, even when your hands are full. It also includes a window with a blackout blind.

    (A 7872-2)

  • LIVING – Simply spacious.

    For extra comfort, the passage to the cab can be closed off with matching upholstered elements. This creates a spacious U-shaped seating lounge and turns the motorhome into a cosy living room – ideal for large family gatherings.

    (A 7872-2)

  • LIVING – Simply spacious.

    As standard, the seating lounge is equipped with two 3-point safety belts facing in the direction of travel and two lap belts facing against the direction of travel.

    (A 7872-2)

  • LIVING – Simply spacious.

    Thanks to multiple direct and indirect light sources, you can create the perfect ambience to suit your mood at any given moment.

    (A 7872-2)

  • LIVING – Simply spacious.

    Thanks to multiple direct and indirect light sources, you can create the perfect ambience to suit your mood at any given moment.

    (A 7872-2)

  • LIVING – Simply spacious.

    Thanks to multiple direct and indirect light sources, you can create the perfect ambience to suit your mood at any given moment.

    (A 7872-2)

  • SLEEPING – Time to turn in!

    There are two berths in the spacious area above the cab. The 210 x 165 cm sleeping area offers more than enough space and the side window and large skylight ensure a good supply of fresh air.

  • SLEEPING – Time to turn in!

    A bedroom to dream of – with a 211 x 152 cm sleeping area, two windows for good ventilation and large overhead lockers for bed linen. Storage nets installed under the overhead lockers allow quick access to items needed during the night. A 230 V socket and two USB charging ports make it easy to keep mobile phones and other devices charged.

  • SLEEPING – Time to turn in!

    Say goodbye to crumpled clothes! Your jackets, shirts and blouses can stay neatly hung up in two large wardrobes with interior lighting while you travel.

  • SLEEPING – Time to turn in!

    Two berths are created by converting the seating lounge: lower the table, fold out the side extension elements, slide the cushions into place – and a comfortable bed with a sleeping area of 195 x 130 cm awaits you

  • BATHROOM – Freshen up.

    The bathroom is equipped with a large mirror surface that gives both taller and shorter occupants a clear view of themselves. The semi-transparent tinted window and forced-ventilation system in the roof ensure good air flow.

  • BATHROOM – Freshen up.

    When not in use, the shower can be used as a space to dry wet clothes – or simply as a wardrobe extension. When not in use, the shower doubles as a drying area for wet clothes – or simply as extra wardrobe space.

  • COOKING – Rediscover the joy of cooking.

    Cooking is simply a pleasure – with plenty of space for chopping and preparing. Everything is organised and within easy reach. The large space in front of the kitchen even allows two chefs to cook in tandem. Other people can also easily pass behind them – just like at home.

    (A 7872-2)

  • COOKING – Rediscover the joy of cooking.

    Besides offering plenty of storage space, the overhead lockers are also equipped with the Dethleffs AirPlus system, which provides rear ventilation to prevent condensation.

    (A 7872-2)

  • COOKING – Rediscover the joy of cooking.

    Delicious! Whether you’re preparing some tasty bread rolls, casseroles or cakes, you won’t want to be without the standard oven.

    (A 7872-2)

  • The fridge in the A 7872-2

    The elevated fridge has a capacity of 137 litres including a 15-litre freezer. The convenient AES function automatically switches to the optimum power source.

Variety of choice

Dimensions

1
2
3
4
5

A 7872-2 Family

1 Length 856 cm
2 Headroom 209 cm
3 Width 232 cm
4 Headroom 209 cm
5 Wheelbase 4600 mm

180 MultiJet 3 Power

Fuel Diesel

8-speed automatic

CCM
2184
Power
180 hp
Electrical installation
Standard equipment
Automatic switch-on/disconnect for starter battery, leisure battery and refrigerator
Spotlights in the roof lining above the habitation door
Leisure battery AGM, 95 Ah
Light Moments: illuminated kitchen splashback
EBL with separate FI protection switch
Pre-wiring for solar
LED lighting throughout the vehicle
Premium on-board control panel with touchscreen
Number of sockets 1x 12V, 7x 230V, 4x USB
Dethleffs connect - System Control Unit Lite
Awning light 12 V
Light Moments: Indirect wall surface ambient lighting
Light Moments: Indirect ambient lighting above the overhead lockers
Optional equipment
Lithium (LiFePo4) battery 150 Ah incl. 45 A charge booster, instead of standard AGM battery
Lithium (LiFePo4) battery 2x150Ah (300Ah) incl. 45 A charge booster, instead of standard AGM battery
Heating
Standard equipment
Heat exchanger for hot-water heating
Hot-water carpet for the driver's cab
Hot-water heating with boiler, automatic drain valve and shut-off valve for the sleeping area and digital control panel
Optional equipment
Electrically heated overcab bed
Water supply
Standard equipment
Switch for water pump
Fresh water and waste water tanks fitted in the double floor (insulated and heated compartment)
Submersible pump
Gas supply
Standard equipment
Storage space for 2 gas bottles with a filling weight of 11 kg each
Outdoor gas socket gas pressure 30 mbar
Automatic gas cylinder switchover incl. crash sensor and EisEx

Downloads

More vehicles from the XL series

Important information regarding the selection of your motorhome

IMPORTANT INFORMATION REGARDING THE SELECTION OF YOUR MOTORHOME

When buying a motorhome, camper van or urban vehicle (hereafter: motorhome), it is particularly important to choose the right layout and an appealing design. In addition, weight also plays an essential role. Family, friends, optional equipment, accessories and baggage – space must be available for all of these. At the same time, there are legal and technical limits to the configuration and load. Every motorhome is designed for a certain weight, which may not be exceeded during driving. For motorhome buyers, this raises the question: How should I configure my vehicle to accommodate passengers, baggage and accessories according to my needs without the vehicle exceeding this maximum weight? In order to make this decision easier for you, we provide you below with a few tips that are particularly important when selecting your vehicle from our portfolio:

1. The technically permissible maximum laden mass…

… is a value set by the manufacturer which the vehicle may not exceed. Dethleffs specifies a layout-related upper limit for the vehicle, which can vary from layout to layout (e.g. 3,500 kg, 4,400 kg). You can find the corresponding specification for each layout in the technical data.

 

2. The mass in running order…

... consists – to put it simply – of the basic vehicle with standard equipment plus a standard weight of 75 kg for the driver. It is legally permissible and possible for the mass in running order of your vehicle to deviate from the nominal value stated in the sales documents. The permissible tolerance is ± 5 %. The permissible range in kilograms is given in brackets after the mass in running order. In order to provide you with full transparency regarding possible weight deviations, Dethleffs weighs each vehicle at the end of the line and informs your trade partner of your vehicle's weighing result for forwarding to you.

Detailed explanations on the subject of mass in running order can be found in the “Legal Information” section.


3. The permitted number of seats (including driver)…

… is determined by the manufacturer in what is referred to as the type-approval procedure. This results in what is referred to as the mass of the passengers. For this, a standard weight of 75 kg per passenger (without driver) is calculated. 

Detailed explanations on the subject of mass of the passengers can be found in the “Legal Information” section.


4. The manufacturer-specified mass for optional equipment…

… is a value set by Dethleffs per layout for the maximum mass of optional equipment that can be ordered. This limit is intended to ensure that the minimum pay-mass, i.e. the legally prescribed free mass for baggage and retrofitted accessories, is actually available for the vehicle load capacity of the vehicles delivered by Dethleffs. If, in exceptional cases, the weighing at the end of the line nevertheless shows that the actual load capacity falls short of the minimum pay-mass due to a permissible weight deviation, we will check together with your trade partner and you whether we should, for example, increase the load capacity of the vehicle, reduce the number of seats or remove optional equipment before delivering the vehicle. 

Detailed explanations on the subject of the effects of the tolerances on the minimum pay-mass and the payload can be found in the “Legal Information” section.

 

5. The additional weight of optional equipment and packages...

... increases the actual mass of the vehicle (= mass in running order plus selected optional equipment) and reduces the pay-mass. The specified value shows the additional weight compared to the standard equipment of the respective layout. The total weight of the selected packages and optional equipment must not exceed the manufacturer-specified mass for optional equipment.